Exchange Platform

Author: e.rutovic
Type: Library
Downloaded: 364 times
Date: 2013-11-27

IEC Symbol Libraries

Description:
Symbol libraries of electrical and protective devices.

This allows to design IEC-compatible schematic with EMTP-RV.

It is just libraries of symbol and cannot be used for simulati... see moreon purpose.

Tag(s): IEC, Symbol

Author: e.rutovic
Type: Example
Downloaded: 1097 times
Date: 2013-02-20

JavaScript Examples

Description:
Some simple EMTP-RV scripts :
- Parameters sweep
- Change the simulation options
- Run simulation
- Change the fault location
- Change the transformer remanent flux
- Cha... see morenge the switching Times

Tag(s): Script, Javascript

Author: AdminEMTP-RV
Type: Model
Downloaded: 375 times
Date: 2012-06-18

Ferro_hyst_Zno

Description:
Simple ferroresonance case. In this case the switching of a part of the network comprised of a cable connected to a no-load transformer is carried out. A pole of the breaker fails to open and an impor... see moretant and stable ferroresonance phenomena appears.
The ferroresonance problem, whether in a general circuit or in a power-system circuit, is usually tackled in one of two ways : circuit configuration (i.e series and/or parallel) or nonlinearities (i.e saturation and hysteresis of transformers). A fundamental factor to the occurence of ferroresonance is the nonlinear magnetizing characteristic of the transformer and the capacitive coupling.
In this case a 250 kVA, 20/0.4 kV transformer is used. This transformer is represented by the hysteresis transformer model. The hysteresis element has been used as the magnetization branch of the one-phase transformer model. A 200 m cable is used for the study. This cable is modelled by a PI-section. The short circuit power of the source is about 150 MVA.
In order to reduce overvoltages caused by ferroresonance, surge arresters are installed. Two questions have emerged : will the arresters mitigate ferroresonance, and will they fail during ferroresonance ? Simulations in different transient regimes can be carried out in order to determine the maximal current, overvoltages (voltage at the end of the cable for instance), energy absorbed by the arresters

Tag(s): Protection

Author: AdminEMTP-RV
Type: Document
Downloaded: 168 times
Date: 2012-06-18

Interpolation and reinitialization for the simulation of power electronic circuits

Description:
Authors:
Ming Zou, Jean Mahseredjian, Geza Joos, Benoît Delourme, Luc Gérin-Lajoie

Abstract:
This paper presents a new interpolationreinitialization method for transient simulat... see moreions in both forced commutation and natural commutation conditions occurring in power electronic circuits. Recently methods in this field are also discussed.

Tag(s):

Author: AdminEMTP-RV
Type:
Downloaded: 213 times
Date: 2012-06-18

Non_Linear_Benchmark

Description:
Benchmark case for testing the nonlinear solution method of transients simulation packages.

This case shows the superior capability of EMTP-RV to handle simultaneous solutions of three very... see more nonlinear elements: Circuit-breaker arc , Hysteretic characteristic of transformers and Zinc-Oxide arresters.

Tag(s): Example