44 Results for the search "voltage":
Author: AdminEMTP-RV
Type: Model
Downloaded: 227 times
Date: 2012-06-18
SW_tContr
Description:
This design introduces a contolled-closing switch very appropriate for asymetrical current or transient voltage studies during shunt-reactor/capacitor bank switching or fault creation.
This... see more is a contribution of Pierre Larivière from Hydro-Québec TransEnergie.
Tag(s): Protection
Author: AdminEMTP-RV
Type: Model
Downloaded: 193 times
Date: 2012-06-18
TCR1
Description:
Example of single phase Thyristor Controlled reactor using TACS control devices. This circuit reproduces the TCR case presented in the EMTP Workbook volume 4 chapter 6.
Example of single ph... see morease Thyristor Controlled reactor using TACS control devices. This circuit reproduces the TCR case presented in the EMTP Workbook volume 4 chapter 6.
The basic static Var system consists of a static switch in series with an inductor. This is normally called a phase controlled reactor, or Thyristor Controlled Reactor (TCR). The TCR is in parallel with a fixed capacitor. Together they interface with the power system at some interconnection point. The control circuit of the TCR can be divided into three parts. There is the gate pulse generator (GPG), the heart of the control system, a voltage regulator and an interface to the power systems which could be simply a RMS voltage meter.
The purpose of the gate pulse generator is to provide firing pulses to the thyristors. The regulator calculates the conduction angle, ?, which is passed to the gate pulse generator as a control signal. It is the function of the gate pulse generator to generate the correct firing pulses to achieve the requested conduction angle, ?. In this example the gate pulse generator is modeled using TACS control devices.
Tag(s): Power Electronics
Author: AdminEMTP-RV
Type: Model
Downloaded: 912 times
Date: 2012-06-18
V_Swing
Description:
This design introduces a three-phase User-defined Swing Voltage Source.
This design should be used with version 1.0.2.
The Swing Voltage Source is used to study the behavior of synchro... see morenous machines connected to a 500 kV network.
Tag(s): Source
Author: AdminEMTP-RV
Type: Model
Downloaded: 188 times
Date: 2012-06-18
V_unb_I2motor
Description:
This design introduces an unbalance three-phase voltage source defined by specified symetrical components. The source is initialized and an angle is defined.
This design should be used with versi... see moreon 1.0.2
This source is used to estimate the I2/I1 ratio of a large induction motor.
Tag(s): Example