Access to EMTP user presentations, webinars, and slide deck presentations.
page 2 of 10
48 presentations for DER:
Author(s): Philipp Hackl
Type:Technical Presentation
Date: 2021-09-07
Switching of Inductive Currents and Dimensioning of RC-Snubbers with PAMSUITE
Abstract
In order to control the voltage in distribution and transmission networks shunt reactors can be used for compensation of reactive power. Due to the switching of their inductive currents, unacceptable ... see more
Author(s): Rohit Kunte
Type:Technical Presentation
Date: 2021-09-06
Induced Voltage Study
Abstract
MidAmerican Energy has conducted studies at some locations on our system to identify voltages that are induced due to lines on the same structures. For example, MidAmerican added a new 161 kV line fro... see more
Tag(s): line, induced voltage, EMI
Author(s): Stefano Vitali
Type:Technical Presentation
Date: 2021-09-06
Analysis and Calculations in Medium Voltage Electrical Systems
Abstract
The electrical installation of an industrial site is a complex structure. Analyzing behavior in a transient condition allows optimum selection of the operation and protection devices in the installati... see more
Tag(s): TRV, generator breaker, filter, switching
Author(s): Pr. Yong Cheol KANG
Type:Technical Presentation
Date: 2021-09-06
Closed-loop Synthetic Inertia Control of a Variable-speed Wind Turbine Generator
Abstract
This presentation introduces a closed-loop SIC scheme of a doubly-fed induction generator (DFIG), which relies on the measured frequency. The SIC scheme employs an additional control loop that operate... see more
Tag(s): synthetic inertia, wind park, inverter, stability, frequency control
Author(s): Frédéric Colas
Type:Technical Presentation
Date: 2021-09-05
From FEMM to EMTP Cable Data – How to Use FEMM to Compute the Power Cable Parameters
Abstract
In the context of the simulation of an electrical network, different models of lines / cables are available. Among these, we can cite the PI models, the frequency dependent models (FD-Line) or the mod... see more
Tag(s): fem, cable, parameters
![[R&D]_EMTP : Recherche et développement](https://www.emtp.com/system/files/imagecache/presentation/slide1_1.jpg "[R&D]_EMTP : Recherche et développement")
![[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen](https://www.emtp.com/system/files/imagecache/presentation/TechnicalPresentation1.jpg "[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen")
