Exchange Platform

Author: AdminEMTP-RV
Type: Model
Downloaded: 456 times
Date: 2012-06-18

CB_arc_CM

Description:
This is an interesting case of the study of arc-circuit interaction in case of the interruption of a short-line fault.The arc is represented by a composite Cassie-Mayr model and the line is represente... see mored as frequency-dependant.
The case shows the application of black-box arc modeling in the study of kilometric-line fault capability of a 420 kV circuit-breaker. By zooming on the arc current and voltage near current-zero, post-arc current and initial TRV may be visualized in both cases of clearing and thermal failure.

Tag(s): Example, Protection

Author: AdminEMTP-RV
Type: Model
Downloaded: 219 times
Date: 2012-06-18

3-phase_Statcom_Prel_Version

Description:
This is a three-phase three level Statcom model with PWM controller for use in transmission and distribution systems. It works quite well under severe perturbation.
The official version of this s... see moretatcom will be available in version 1.1 to be release in mid-june 2004.

Tag(s):

Author: AdminEMTP-RV
Type: Document
Downloaded: 302 times
Date: 2012-06-18

Induction machine modeling for distribution system analysis using initialization and time-domain methods

Description:
Panel session paper to be presented at the IEEE T&D show in New Orleans (Oct. 2005)
Authors: J. Mahseredjian, S. Dennetière, B. Khodabakhchian and A. Xémard
Abstract:
This pap... see moreer is presented as part of an effort by the Distribution System Analysis Subcommittee to establish reference cases for induction machine modeling in distribution system analysis and unbalanced three-phase systems. This panel paper presents analysis results obtained when applying a full time-domain method with load-flow and steady-state initialization. The selected software is EMTP-RV. Problem solution complexities are discussed.

Tag(s):

Author: AdminEMTP-RV
Type: Model
Downloaded: 334 times
Date: 2012-06-18

Line_Coupling

Description:
The following example demonstrates the coupling effect between 3 adjacent transmission lines.

The case study consists of the implementation of a third transmission line next to two existing... see more lines. The data of the geometrical configuration are entered in the DATA LINE module and are stored in the "line_couplin_CP.lin". The generated model was obtained using the CP option and are loaded to the CP m-phase module using the data included in the "line_coupling_CP_rv.csv" file. The results are very close to the measurements provided in "H.W. DOMMEL ET AL, CASE STUDIES FOR ELECTROMAGNETIC TRANSIENTS, P.1,1991".

Tag(s):

Author: AdminEMTP-RV
Type: Document
Downloaded: 260 times
Date: 2012-06-18

On the implementation of a hysteretic reactor model in EMTP

Description:
Authors:
Sébastien Dennetière, Jean Mahseredjian, Manuel Martinez, Michel Rioual, Alain Xémard, Patrick Bastard

Abstract:
This paper presents the implementation of a hysteretic... see more reactor model in a transient analysis package. Themodel is available in a currently developed EMTP (DCGEPRI) version. It is demonstrated how the hysteretic reactor equations can be solved to eliminate topological limitations and allow solving large scale networks efficiently. Numerical robustness aspects and the representation of minor loops are emphasized. The model demonstrates new and not previously available computational capabilities.

Tag(s):