Exchange Platform

Author: h.gras
Type: Example
Downloaded: 240 times
Date: 2017-02-03

Tutorial on exported mask (Demonstrated with an exciter)

Description:
In this example, a device is placed in a subcircuit. The goal is to be able to modify the parameters of this device from the parent mask.
However, this device is a masked subcircuit and therefore... see more ## are not accepted. Here are two options to achieve this task.

Tag(s): exported, mask, exciter, governor, subcircuit, subnetwork, script, method

Author: h.gras
Type: Example
Downloaded: 724 times
Date: 2016-10-11

Tutorial example on ZnO modelling

Description:
In this example, it is detailed step by step how to built a ZnO surge arrester model following the IEEE working group 3-4-11.
The model is built using different impulse test results.

Tag(s): ZnO, surge, arrester, IEEE, 3-4-11, impulse

Author: h.gras
Type: Library
Downloaded: 1360 times
Date: 2016-03-16

Micro-Grid library

Description:
Convenient library to study Micro-grid. Contain:
- a 3-phase inverted with dq0 control (PQ, PV, VF, droop)
- a battery model (Ideal, i-Ion, Lead-Acid, NiMH, NiCD)
- a PV park
- Win... see mored parks
- low pass filter
- on-off delays
- PI controller

If anything, please contact me: Henry - h.gras@powersys-solutions.com

Tag(s): Micro, grid, smart, inverter, dq0, battery, BMS, VSC, filter, delay, trigger, Wind, PV, photovoltaic, park, power, electronics

Author: n.sene
Type: Publication
Date: 2015-10-22

Fault Current Limiters in Industrial Power Systems

Description:
The concept of saturable core fault current limiter (FCL) is relatively known nowadays. It usually consists of two reversely magnetized cores per phase to effectively limit the fault current passively... see more and immediately upon its inception. In this paper prospects of application of fault current limiters in industrial power systems will be considered. Industrial power systems (distribution networks) are widespread and include a number of various electrical appliances. The power systems development (addition of new power plants, interconnections, etc.) may lead to more intense short circuit currents at the fault location. Furthermore, industrial systems may possess on-site generation which can increase fault current levels as well. All these factors might require appropriate upgrades of industrial system electrical equipment (especially switchgear) or special operating procedures (for instance avoiding parallel operation). Another alternative is the installation of fault current limiters. In this light, a series of simulations were carried out in order to observe the impact of fault current limiters on short circuit currents in an industrial power system using the EMTP-RV software program.

Keywords: saturable core fault current limiter (FCL), industrial power system, induction machine, EMTP; fault current analysis, medium voltage

Tag(s): saturable core fault current limiter (FCL), industrial power system, induction machine, EMTP; fault current analysis, medium voltage

Author: h.gras
Type: Example
Downloaded: 669 times
Date: 2015-06-16

Content of the webinar studies from A to Z on TRV

Description:
Designs built or presented during the webinar of the series Studies from A to Z on Transient Recovery Voltage
Models built:
- Rating TRV envelop (IEC 62271-100 / C37.010 - 2011)
- CP / ... see moreFD lines
- Thevenin equivalent of a network

Tag(s): TRV, Transient recovery voltage, short-line fault, terminal fault, substation, 62271, 37.011, lines, switching, thevenin