Exchange Platform

Author: thpapad
Type: Document
Downloaded: 343 times
Date: 2017-11-03

INDUCED VOLTAGES AND CURRENTS: OVERVIEW AND EVALUATION OF SIMULATION MODELS AND METHODOLOGIES

Description:
In this paper induced voltages and currents caused by underground cables are calculated in cable sheaths and nearby metallic pipelines. The performance of several simulation methods and models are inv... see moreestigated in steady-state, considering also different implementations in ATP-EMTP, EMTP-RV and PSCAD/EMTDC. The analysis is extended in the simulation of transient overvoltages in cable systems, evaluating the accuracy of two widely used simulation models. The influence of different parameters is investigated, among them specifically the earth properties. Results reveal that implementing accurate earth representations, earth conduction effects have a significant impact on induced voltages at the power frequency, while for high frequency phenomena the influence is minor.

Tag(s): induced voltages

Author: n.sene
Type: Publication
Date: 2015-10-22

Fault Current Limiters in Industrial Power Systems

Description:
The concept of saturable core fault current limiter (FCL) is relatively known nowadays. It usually consists of two reversely magnetized cores per phase to effectively limit the fault current passively... see more and immediately upon its inception. In this paper prospects of application of fault current limiters in industrial power systems will be considered. Industrial power systems (distribution networks) are widespread and include a number of various electrical appliances. The power systems development (addition of new power plants, interconnections, etc.) may lead to more intense short circuit currents at the fault location. Furthermore, industrial systems may possess on-site generation which can increase fault current levels as well. All these factors might require appropriate upgrades of industrial system electrical equipment (especially switchgear) or special operating procedures (for instance avoiding parallel operation). Another alternative is the installation of fault current limiters. In this light, a series of simulations were carried out in order to observe the impact of fault current limiters on short circuit currents in an industrial power system using the EMTP-RV software program.

Keywords: saturable core fault current limiter (FCL), industrial power system, induction machine, EMTP; fault current analysis, medium voltage

Tag(s): saturable core fault current limiter (FCL), industrial power system, induction machine, EMTP; fault current analysis, medium voltage

Author: n.sene
Type: Publication
Date: 2015-04-02

SITL and HLA Co-simulation Platforms: Tools for Analysis of the Integrated ICT and Electric Power System

Description:
Due to the necessity of developing analysis tools in the integrated ICT and power system domain, this paper describes and compares the architecture and configuration of two different ITC-power system ... see moreco-simulation approaches called SITL (System in the Loop) and HLA (High Level Architecture) Co-simulation platforms. Both platforms make use of the communication network simulator OPNET (Optimum Network Performance). As indicated by the names, the former operates in real time, in order to perform SITL simulations, whilst the latter is based on the HLA interface between OPNET and the power network simulation environment EMTP-rv (Electromagnetic Transient Program). We provide several details on their implementation and present their features by means of the results obtained for two test cases. The paper aims at clarifying the type of analysis that can be effectively carried out by using the two different platforms.

Authors: Riccardo Bottura, Davood Babazadeh, Kun Zhu, Alberto Borghetti, Lars Nordström, Carlo Alberto Nucci

EuroCon 2013 • 1-4 July 2013 • Zagreb, Croatia

Tag(s): Co-simulation, OPNET, EMTP, High level architecture, System in the loop, Smart grid, OPAL-RT.

Author: n.sene
Type: Publication
Date: 2015-04-02

lCT -power Co-simulation Platform for the Analysis of Communication-based Volt/Var Optimization in Distribution Feeders

Description:
The paper presents an ICT and power co-simulation platform for the analysis of the voltlvar control and relevant optimization in medium voltage distribution feeders, achieved by means of a system of d... see moreistributed controllers coordinated via a shared band-limited digital communication network. The platform has been built by realizing the interface between two specific simulation environments:
the Electromagnetic Transient Program EMTP-RV and the communication network simulator Opnet Modeller. The preliminary results provide basic indications on the expected performances of the considered communication-based strategies for ditJerent tratlic congestion levels and load/generation dynamic variations.

Authors: Riccardo Bottura, Alberto Borghetti, Fabio Napolitano, Carlo Alberto Nucci

Tag(s): Co-simulation, Networked Control Systems, Power distribution feeders, Voltlvar optimization.

Author: n.sene
Type: Publication
Date: 2015-04-02

Simulation of the Volt/Var Control in Distribution Feeders by Means of a Networked Multiagent System

Description:
The adoption of networked multiagent systems (MAS) has been recently proposed for the solution of the volt/var control (VVC) problem in distribution feeders. However, constraints and limitations due t... see moreo the communication network, to the dynamic behavior of power system components and regulators, as well as to the measurement uncertainties of the adopted sensors need to be specifically analyzed for the design of the MAS. For this purpose, a cosimulation platform has been built by the integration of two simulation tools:
1) the electromagnetic transient program EMTP-rv; and 2) the communication network simulator Riverbed-OPNET Modeler. This paper presents the modeling and simulation of an asynchronous leaderless MAS-based approach that coordinates the reactive power outputs of a set of power compensators equipped with phasor measurement units via a shared band-limited packet-switched digital communication network. The effects of communication network latency and packet loss on the VVC performances are analyzed for two unbalanced IEEE Test feeders equipped with on-load tap changer transformers. The paper compares the results obtained by using a transmission control protocol (TCP) and a user datagram protocol (UDP), for different levels of background traffic (BT) and different packet discard ratios (PDRs) in the communication links.

Authors: Riccardo Bottura, Student Member, IEEE, and Alberto Borghetti, Senior Member, IEEE

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, VOL. 10, NO. 4, NOVEMBER 2014

Tag(s): Cosimulation, medium voltage distribution feeders, multiagent systems (MAS), networked control systems (NCS), phasor measurement unit (PMU), volt/var control (VVC).