Author(s): Neeraj Patel
Type:Technical Presentation
Date: 2021-09-07

Reactive Power Energy Management, Analysis of Reactive Power Consumption in Solar Power Plant847

Abstract
For any Power Plant, it is aimed to have maximum Energy Generation and yielding for the Power Output. Solar power plant comprises PV cells, framing array by connecting with each solar panel and then c... see moreonnected with step-up transformer (Inductive element) by cable network (capacitance formed). The energy generated by PV cells are being converted by Solar inverters (Power electronics) and operated at almost Unity Power Factor.
It has been observed that with export of Active energy and increasing output, there is also import of Reactive energy varying with solar generation. The Tariff charges are involved and applicable for Reactive Power Consumption in said solar power plant. Active energy also imported during evening and night hours in absence of solar generation to run critical equipments and trend between active and reactive energy has been observed vice versa.
As per the State Tariff regulations, beneficiary must pay/gets paid for reactive power drawl/supply which is decided and bounded by the system voltage limit (e.g. 97% to 103% of Rated system voltage).

Considering varying MVAR absorption phenomena associated with active power generation and effect of supply voltage, it has been decided to study and model solar generation in EMTP. Different cases have been simulated in EMTP software. Major sources consume Reactive Power identified from modelling and matched observation with actual recorded data. Mitigation technique for reactive power compensation has been studied and modelled. Rating for reactive power compensation source has been validated. Switching phenomena associated with reactive power compensation technique along with voltage profile at different points has also been studied and appropriate rating for switching devices/switchgear has been suggested.
Detail study and simulation results will be shared during presentation.

Tag(s): reactive power, compensation, pv park, inverter

Author(s): Philipp Hackl
Type:Technical Presentation
Date: 2021-09-07

Switching of Inductive Currents and Dimensioning of RC-Snubbers with PAMSUITE846

Abstract
In order to control the voltage in distribution and transmission networks shunt reactors can be used for compensation of reactive power. Due to the switching of their inductive currents, unacceptable ... see moreswitching transient voltages might occur which can lead to damage of equipment. Furthermore, the breaker must be able to withstand the transient recovery voltage (TRV), amplitude and rate of rise (RRRV) respectively. One possibility to mitigate these switching transients are so-called RC Snubbers. They have to be dimensioned according to the topology and the values of R and C can be optimized with the PAMSUITE tool. In this presentation the modelling and the results of the TRV due to shunt reactor switching is discussed and the mitigation with RC Snubbers with the help of PAMSUITE is shown.

Tag(s): TRV, PAMSUITE, snubber, switching

Author(s): Rohit Kunte
Type:Technical Presentation
Date: 2021-09-06

Induced Voltage Study843

Abstract
MidAmerican Energy has conducted studies at some locations on our system to identify voltages that are induced due to lines on the same structures. For example, MidAmerican added a new 161 kV line fro... see morem substation D to substation E (not shown) through substation C. The line is mostly single circuit except between substations B and C where a second 161 kV line was added on the structures. There is also an existing 13.2 kV underbuilt distribution circuit on the structures between substations A to C.

The induced voltage study was performed to get an understanding on the level of voltages that may be expected when the 161 kV line from substation A to substation C is out of service, but the 161 kV line from substation D to substation C is in service and vice versa. The analysis provided very useful information on the level of induced voltages that may be expected on the 13 kV distribution feeder and helped MidAmerican to develop mitigation measures.

Tag(s): line, induced voltage, EMI

Author(s): Stefano Vitali
Type:Technical Presentation
Date: 2021-09-06

Analysis and Calculations in Medium Voltage Electrical Systems833

Abstract
The electrical installation of an industrial site is a complex structure. Analyzing behavior in a transient condition allows optimum selection of the operation and protection devices in the installati... see moreon design phase; in addition, possible weaknesses and critical points can be highlighted in advance, allowing prevention of potential problems, damage to machinery, and costly periods of down time.

In order to completely satisfy the needs and expectations of the customer, in ABB Electrification Business an important role is played by analyses and consulting services offered by Field Application Support (FAS) specialist.

In this session of the "EMTP User conference", representatives from the Italian ABB Distribution Solution division, based in Dalmine (BG), will show how EMTP tool supports the analyses performed within the "Medium Voltage Circuit Breaker Suitability" reports that are provided to customers looking for switching devices for special applications. In particular, the today presentation will focus on "CB suitability" study approach for the Generator Circuit Breaker and the Filter Harmonics switching applications

Tag(s): TRV, generator breaker, filter, switching

Author(s): Pr. Yong Cheol KANG
Type:Technical Presentation
Date: 2021-09-06

Closed-loop Synthetic Inertia Control of a Variable-speed Wind Turbine Generator834

Abstract
This presentation introduces a closed-loop SIC scheme of a doubly-fed induction generator (DFIG), which relies on the measured frequency. The SIC scheme employs an additional control loop that operate... see mores in conjunction with the MPPT control loop. Simulation results using an EMTP-RV simulator will be presented under various wind and system conditions for the IEEE 14-bus system.

Tag(s): synthetic inertia, wind park, inverter, stability, frequency control